快捷方式:发布信息| 收藏公司

耐酸碱自干金属油墨

产品/服务:
有效期至: 长期有效
最后更新: 2017-12-09 16:02
单价:
面议
立即询价

(发货期限:自买家付款之日起 天内发货)

  • VIP指数:    0 [第1年]
  • 认证信息:          
  •   通过认证
  • 所在地区:
收藏本公司 人气:303
  • 详细说明
  • 规格参数
  • 联系方式

“耐酸碱自干金属油墨”参数说明

是否有现货: 认证: ISO9001
品牌: 欧莱斯 着色力: 100
适用对象: 金属,玻璃,陶瓷,电镀,五金,不锈钢 单件净重: 1公斤
保质期: 72 粘度: 1500S
流动度≥: 100 颜色: 黑,白,红,蓝,黄,绿,紫
型号: MPL 规格: 1公斤
商标: 欧莱斯 包装: 按订单
干燥时间: 表干5-10分钟,实干24小时 产量: 10000000

“耐酸碱自干金属油墨”详细介绍

耐酸碱金属油墨说明:

具有高色泽、高色彩、高遮盖力、高稳定性、耐酒精及耐磨擦之特点。 印刷:丝印移印均可。 表干及实干时间:表干时间自然挥发5-10分钟;实干时间在24小时以内。 稀释及清洗:SV3慢干开油水、UVK1(移印开油水)同时可使用718洗网水清洗。 测试方法(完全干燥后): 1、3m胶纸粘在画有百格的油墨表面,45度角迅速拉起不脱油; 2、纯度99%的工业酒精,一千克砝码用棉布包住在油墨表面,以水平力来回拉200次无脱色; 3、 耐磨:橡皮擦500g力水平来回擦500次。 使用方法: 1、使用前应充分搅拌,用后随时封闭; 2、搅拌时加开油水10-15%,稀释到印刷粘度; 3、网板塞网时可用洗网水清洗; 4、不得与其它类型油墨混合使用。 注意事项: 1、塑胶材料的外观相似,但可能会是不同的材料,客户需试印确定其符合要求后,再批量印刷; 2、在移印过程中,如出现拉丝或散开,可适当加入一些慢干膏即可; 3、环境温度过高,将会影响油墨原有质量; 4、根据气候变化,请远离火源,阴暗环境下存放。 Oles MPE Plating Ink

MPE plating strengthening series ink characteristics : mainly used in plating surface, enhanced surface, vacuum plating surface.PU surface.UV surface and other materials, with a high color, high color, high covering power, high stability, high alcohol and rub characteristics. Printing: screen printing can be. Surface drying and drying time: surface dry time natural volatile 5-10 minutes; work time within 24 hours. Dilution and cleaning: SV3 slow dry open water, UVK1 ( printing open water) can be simultaneously used 718 washing network water cleaning. Test method ( completely dry ): 1, 3M gummed paper in the paintings of the surface of the ink, 45 degree angle quickly pulled off the oil; 2, 99% of the purity of industrial alcohol, one kilogram of weight of cotton pack in the ink surface, with a horizontal force pulling back and forth 200 times without decolorization; 3: oak, wear resistance eraser 500g force level brush back and forth 500 times. Usage: 1, use should be fully stirred, use at any time after the closure; 2, add water mixing 10-15%, diluted to 3, screen printing viscosity; the plug is available when washing network water cleaning; 4, not with other types of ink mixing. Note: 1, the plastic material similar in appearance, but may be of different materials, customers need to try to determine its requirements, and then batch printing; 2, in the printing process, such as drawing or spread out, may be appropriate to add some slow dry plaster; 3, the ambient temperature is too high, will affect the quality of the original ink; 4, according to climate change, please stay away from fire, dark environment storage.


您可以通过以下类目找到类似信息:

 

免责声明:以上所展示的信息由会员自行提供,内容的真实性、准确性和合法性由发布会员负责。湖南电子经贸网对此不承担任何责任。

友情提醒:为规避购买风险,建议您在购买相关产品前务必确认供应商资质及产品质量!