“3528红光620-625nm灯珠”参数说明
是否有现货: | 否 | 认证: | CE RoHS reach lm-80 |
品牌: | 荧月电子 | 芯片品牌: | 三安 |
工作电流: | 150 | 工作电压: | 2.8-3.0 |
功率: | 0.2 | 外形尺寸: | 2835 |
支架材质: | 铜 | 热阻: | ≤5 |
显色指数: | 90以上 | 发光角度: | 120 |
发光效率: | 130 | 发光面尺寸: | ¢17 |
色容差: | <5 | 96小时加速老化: | 98 |
最大允许结温: | 120 | 光强/光通量: | 800-1000mcd |
主波长/色温: | 620-625 | ESD(人体模式): | 4000 |
1000小时常规老化: | 100 | 型号: | Yt3528wos1-6200 |
规格: | 3528 | 包装: | 3000PCS/盘 |
产量: | 100000000 |
“3528红光620-625nm灯珠”详细介绍
。注意事项Cautions
(1)焊接条件Soldering Conditions
本产品最多只可回焊两次,且在首次回焊后须冷却至室温之后方可进行第二次回焊。
Number of reflow process shall be less than 2 times and cooling process to normal temperature is required between first and Second soldering process.
推荐焊接条件(Recommended soldering conditions)
回流焊接Reflow Soldering 手工焊接Hand Soldering
预热温度Pre-heat
预热时间Pre-heat time
峰值温度Peak temperature
焊接温度Soldering time
条件Condition 有铅Lead Solder 无铅Lead-free Solder 温度Temperature
焊接时间Soldering time
350°C Max.
3 sec.Max.
(one time only)
140~160°C
120 sec.Max.
230°C Max.
10 sec.Max.
参考下图 180~200°C
120 sec.Max.
260°C Max.
10 sec.Max.
参考下图
有铅回焊(Lead Solder)无铅回焊(Lead-Free Solder)
推荐焊盘式样(Recommended Soldering Pattern)单位:毫米(Units:mm)
(2)静电 Static Electricity
触摸LED时,推荐使用防静电手腕带或防静电手套。
It is recommended that a wrist band or an anti-electrostatic glove be used when handling the LEDs.
所有装置、设备、机器均应接地。
All devices,equipment and machinery must be properly grounded.
静电损坏的LED会显示出异常特征:正向电压变低或在低电流时死灯。标准:IF=0.5mA时,VF>2.0V
Damaged LEDs will show some unusual characteristics such as the forward voltage becomes lower,or the LEDs do not light at the low current.Criteria:(VF>2.0V at IF=0.5mA)
(3)防潮包装Moisture Proof Package
使用防潮包装
It is recommended that moisture proof package be used.
(1)焊接条件Soldering Conditions
本产品最多只可回焊两次,且在首次回焊后须冷却至室温之后方可进行第二次回焊。
Number of reflow process shall be less than 2 times and cooling process to normal temperature is required between first and Second soldering process.
推荐焊接条件(Recommended soldering conditions)
回流焊接Reflow Soldering 手工焊接Hand Soldering
预热温度Pre-heat
预热时间Pre-heat time
峰值温度Peak temperature
焊接温度Soldering time
条件Condition 有铅Lead Solder 无铅Lead-free Solder 温度Temperature
焊接时间Soldering time
350°C Max.
3 sec.Max.
(one time only)
140~160°C
120 sec.Max.
230°C Max.
10 sec.Max.
参考下图 180~200°C
120 sec.Max.
260°C Max.
10 sec.Max.
参考下图
有铅回焊(Lead Solder)无铅回焊(Lead-Free Solder)
推荐焊盘式样(Recommended Soldering Pattern)单位:毫米(Units:mm)
(2)静电 Static Electricity
触摸LED时,推荐使用防静电手腕带或防静电手套。
It is recommended that a wrist band or an anti-electrostatic glove be used when handling the LEDs.
所有装置、设备、机器均应接地。
All devices,equipment and machinery must be properly grounded.
静电损坏的LED会显示出异常特征:正向电压变低或在低电流时死灯。标准:IF=0.5mA时,VF>2.0V
Damaged LEDs will show some unusual characteristics such as the forward voltage becomes lower,or the LEDs do not light at the low current.Criteria:(VF>2.0V at IF=0.5mA)
(3)防潮包装Moisture Proof Package
使用防潮包装
It is recommended that moisture proof package be used.
“3528红光620-625nm灯珠”其他说明
项目 Item |
符号 Symbol |
最大绝对额定值 Absolute Maximum Rating |
单位 Unit |
正向电流Forward Current | IF | 20 | mA |
正向脉冲电流Pulse Forward Current | IFP | 100 | mA |
反向电流Allowable Reverse Current | IR | 85 | mA |
功率消耗Power Dissipation | PD | 105 | mW |
工作温度Operating Temperature | Topr | -40 ~ +110 | °C |
贮藏温度Storage Temperature | Tstg | -40 ~ +110 | °C |
芯片温度Dice Temperature | Tj | 125 | °C |
焊接温度Soldering Temperature | Tsld |
Reflow Soldering : 260°C Hand Soldering : 350°C |
for 10sec. for 3sec. |