“超级mini医疗设备用四键薄膜小开关”参数说明
是否有现货: | 否 | 认证: | ISO |
类型: | 凸起 | 材料: | 砂面聚酯PET |
结构: | 面版打凸触感型 | 电路形成方式: | 导电印料印刷电路 |
环境: | 常用 | 型号: | FF070-01 |
规格: | 27.5*27.5mm | 商标: | Flexkys |
包装: | 纸箱 | 产量: | 100000 |
“超级mini医疗设备用四键薄膜小开关”详细介绍
1.金属弹片后推荐为鼓泡按键
2.毛面PET,Pantone 色 Aquamarine 14-4313 & scuba blue 16-4725
3.尾线长60mm 1.25mm burge pins 接头
难做的就是开关尺寸太小,但是客户要求的是1.25mm间距的平接头,最终解决方案就是,电路部分线距1.00mm,引线部分线距改成1.25mm。
Mini小开关,过程不简单。看起来很cute,实际很费事。但是,为了帮助客户的项目顺利开展,我们将竭尽全力服务。
实际上客户在开发产品的时候,有很多也是不太懂设计和技术,作为销售和厂家,我们在接到客户项目的时候,一定要面面俱到,考量所有的细节,以防因为某个小细节弄错而导致整个项目破产,或者能够及时帮助客户发现设计错误,也能避免很多损失。这个产品就是花了很多心思。不容易啊。需要薄膜开关的来找我哈。
我的微信:sally_celery.
难做的就是开关尺寸太小,但是客户要求的是1.25mm间距的平接头,最终解决方案就是,电路部分线距1.00mm,引线部分线距改成1.25mm。
Mini小开关,过程不简单。看起来很cute,实际很费事。但是,为了帮助客户的项目顺利开展,我们将竭尽全力服务。
实际上客户在开发产品的时候,有很多也是不太懂设计和技术,作为销售和厂家,我们在接到客户项目的时候,一定要面面俱到,考量所有的细节,以防因为某个小细节弄错而导致整个项目破产,或者能够及时帮助客户发现设计错误,也能避免很多损失。这个产品就是花了很多心思。不容易啊。需要薄膜开关的来找我哈。
我的微信:sally_celery.
谢谢
“超级mini医疗设备用四键薄膜小开关”其他说明
Materials | |||
Part | Ordinary Material | ||
Finish | Specification | ||
Graphic Overlay | PC | Gloss | 0.175/.25/.35/.5 mm thickness |
Matt | 0.175/.25/.35/.5 mm thickness | ||
PET | Fine Texture | 0.15/.20 mm thickness | |
Valet Texture | 0.15/.20 mm thickness | ||
Gloss with Hard Coat | 0.18 mm thickness | ||
Top Adhesive | PET Double-sided adhesive | 0.10/.22/.28 mm thickness | |
Paper Double-sided Tape | 0.10 mm thickness | ||
Transfer Tape | 0.06/.12 mm thickness | ||
Retainer | PET | Gloss | 0.125 mm thickness |
Spacer | PET Double-sided Tape | 0.225/.275 mm thickness | |
Circuit Layer | PET | Gloss | 0.1/.125 mm thickness |
Rear Adhesive | Paper Double-sided Tape | 0.10 mm thickness | |
Transfer Tape | 0.06/.12 mm thickness | ||
Connector | Pin | Metal,Male/Female 2.54mm | |
House | Female,2.54mm | ||
Conductive Layer | Silver Paste | Acheson ELECTRODA 820B | |
Carbon Paste | Acheson ELECTRODA 423SS | ||
Insulation Ink | Acheson ELECTRODA 452SS | ||
Electrical Performances | |||
Wire Resistance | 0.5mm width,≤1Ω/cm | Rated Current | 25-100mA,0-30V DC |
Insulation Resistance | >100MΩ 250V DC | Working Voltage | <50V DC |
Working Life | >500k times | Working Temperature | -30℃-70℃ |
Working Humidity | 40℃,98%RH | Withstand Voltage | 1500V DC |
Feedback Time | 10ms | Tail Folding | R>1,180 |
QC Standards | |||
Overlay Printing | Spelling mistake | Not allowed | |
Incorrect Font | Not allowed | ||
Dimension error | >0.2mm is Not allowed | ||
Color | Less than 2 levels with the specified Pantone color | ||
Dot impurities | Diameter less than 0.2mm. Distance between two impurities is more than 50mm.The number of impurities is less than 2 within 100cm² | ||
Linear impurities | Width is less than 0.2mm,length is less 0.4mm in panel surface. Distance between two impurities is more than 50mm | ||
Window impurities | Diameter is less than 0.2mm in the center of the window | ||
Circuit layer Printing | Routing error | Not allowed | |
Circuit Line width | >0.2mm is not allowed | ||
Position offset | >0.2mm is not allowed | ||
The key size deviation | >0.2mm is not allowed | ||
Dot impurities | Diameter less than 0.4mm. Distance between two impurities need be more than 20mm.The number of impurities is less than 3 within 100cm² | ||
Linear impurities | Width is less than 0.3mm, length is less than 1mm. Distance between two impurities is more than 50mm. Impurities can not across two lines.The number of impurities is less than 3 within 100cm² | ||
Loose | Not Allowed | ||
Askew | Obvious, Not Allowed | ||
Appearance |
Product layered, the edge cracking |
Not allowed | |
Stains | Not allowed | ||
Damage | Not allowed | ||
Performance | Life of single button | With usual operation method, more than 500K times | |
Service life of the switch |
In the standard environment and operation method, it is more than 1 year |