“2000高压蒸汽灭菌器”参数说明
医疗器械注册(备案)号: | 国食药 | 是否有现货: | 是 |
样式: | 台式 | 适用场合: | 医院 |
型号: | 2000 | 规格: | 一台装 |
商标: | 赛康 | 包装: | 一台装 |
“2000高压蒸汽灭菌器”详细介绍
2000高压蒸汽灭菌器 Installation and monthly maintenance for 安装和每月的维护
The rpi cassette seal(rpi part#scs001)to fit the statim 2000cassette autoclave 2000高压蒸汽灭菌器
The rpi cassette seal(rpi part#scs029)to fit the statim 5000cassette autoclave 5000高压蒸汽灭菌器
1. The cassette must be opened and cooled before removing the cassette seal.(See Figure A)1.
2. Start with any of the(4)corners and begin prying the cassette seal loose using the RPI Cassette Seal Removal Tool(RPI Part#RPT372)and by pulling down and out at the same time.(See Figures B and C)
3. Once the first corner is free,take hold of the cassette seal and pull down and out in order to remove it from the cassette groove.Be careful not to tear the(2)locating tabs in each corner of the cassette seal.(See Figures B and C)
4. Once the cassette seal has been removed,it is important to inspect,clean and remove any residue and/or debris from the cassette groove.Check for dings and dents on both halves of the cassette;if present,a proper seal may not occur.(See Figure D)
5. Using(1)package of RPI Liquid Soap(RPI Part#RPS287),lube the cassette seal completely.Note:It is not necessary to lube the Inside of the cassette seal.(See Figure E)
6. Now you are ready to install the casette seal
7. When installing the cassette seal,it is best to start in the back corner,nearest the holes of
2000型时代灭菌器的日常保养
1.灭菌盒的保养
2.密封圈的保养
经常使用中性皂液护理密封圈
在密封圈老化时,用户可以自己更换密封圈。熟练了可一次安装到位
安装前先将盒盖安放密封圈的槽清理干净,将密封圈涂上一层中性润滑剂,再进行安装。
首先要将进、排气孔完全对准
然后将进密封圈四个角上的八个凸起卡住盒盖的角上
再将密封圈的四边挤压进盒盖的槽内
3.蓄水箱定期清洗(每个月要排空一次水箱,否则会产生内毒素)
4.经常检查细菌过滤器的颜色
5.注意排气管不要压折
6.经常注意机器下方及灭菌盒承托框架内是否积水
The rpi cassette seal(rpi part#scs001)to fit the statim 2000cassette autoclave 2000高压蒸汽灭菌器
The rpi cassette seal(rpi part#scs029)to fit the statim 5000cassette autoclave 5000高压蒸汽灭菌器
1. The cassette must be opened and cooled before removing the cassette seal.(See Figure A)1.
2. Start with any of the(4)corners and begin prying the cassette seal loose using the RPI Cassette Seal Removal Tool(RPI Part#RPT372)and by pulling down and out at the same time.(See Figures B and C)
3. Once the first corner is free,take hold of the cassette seal and pull down and out in order to remove it from the cassette groove.Be careful not to tear the(2)locating tabs in each corner of the cassette seal.(See Figures B and C)
4. Once the cassette seal has been removed,it is important to inspect,clean and remove any residue and/or debris from the cassette groove.Check for dings and dents on both halves of the cassette;if present,a proper seal may not occur.(See Figure D)
5. Using(1)package of RPI Liquid Soap(RPI Part#RPS287),lube the cassette seal completely.Note:It is not necessary to lube the Inside of the cassette seal.(See Figure E)
6. Now you are ready to install the casette seal
7. When installing the cassette seal,it is best to start in the back corner,nearest the holes of
2000型时代灭菌器的日常保养
1.灭菌盒的保养
2.密封圈的保养
经常使用中性皂液护理密封圈
在密封圈老化时,用户可以自己更换密封圈。熟练了可一次安装到位
安装前先将盒盖安放密封圈的槽清理干净,将密封圈涂上一层中性润滑剂,再进行安装。
首先要将进、排气孔完全对准
然后将进密封圈四个角上的八个凸起卡住盒盖的角上
再将密封圈的四边挤压进盒盖的槽内
3.蓄水箱定期清洗(每个月要排空一次水箱,否则会产生内毒素)
4.经常检查细菌过滤器的颜色
5.注意排气管不要压折
6.经常注意机器下方及灭菌盒承托框架内是否积水